Aluminu Propellers for 60-130HP Honda Outboard Boat Motor
Choosing the perfect propeller can transform your boating experience—improving acceleration, fuel economy, handling, and top speed. Our precision‑cast aluminum propellers suit Honda 60–130HP outboard motors, and they work equally well on many Yamaha, Mercury, Suzuki, and Volvo outboards as an affordable, high‑performance alternative. Please note, we are not the official propeller manufacturer for any OEM brand; we simply engineer our props to fit their engines.
Why an Aftermarket Aluminum Propeller Makes Sense
-
Cost Savings without Compromise
You’ll often pay 40–60% less compared to OEM‑branded props. Yet our durable aluminum alloy, heat‑treated hub, and fine CNC‑machined edges deliver a lifespan on par with—and sometimes beyond—factory pieces. -
Customized Performance
Need more punch off the hole? Or perhaps better cruise‑range at mid‑throttle? By offering a broad spread of diameters, pitches, and blade counts, you can dial in exactly the thrust and top‑end behavior you crave. -
Reliable Fitment
Each propeller matches the Honda OEM number for bolt pattern, spline count (15‑tooth), and thru‑hub exhaust. That means no adapters, no slippage, and no tundra‑drip headaches.
Decoding Propeller Specs
Before we dive into our lineup, let’s brush up on the key parameters:
-
Blade Count (B):
-
Three blades accelerate quickly and top out at higher speed.
-
Four blades cling to the water better, offering shorter planing times and tighter turns—ideal for heavy loads or aggressive handling.
-
-
Diameter (D):
The circle made by the blade tips, measured in inches. A larger diameter boosts low‑end towing grunt; a smaller diameter frees up more RPM for top‑speed runs. -
Pitch (P):
The theoretical distance the prop would move in one revolution with zero slip. Lower pitch gives stronger acceleration; higher pitch elevates top‑end. -
Rotation (R):
All of our props turn right‑hand (clockwise when viewed from aft), matching the standard Honda outboard.
Our Complete 60–130HP Aluminum Propeller Range
Below is an at‑a‑glance table of every model we offer. You’ll recognize the Honda OEM number for fitment, alongside blade count, diameter, pitch, and standard right‑hand rotation.
| OEM Number | Blades | Diameter (in) | Pitch (in) | Rotation |
|---|---|---|---|---|
| 3‑Blade Options | ||||
| 58130‑ZW1‑021AH | 3 | 12.75 | 21 | R |
| 58130‑ZW1‑019AH | 3 | 13.00 | 19 | R |
| 58130‑ZW1‑021AH | 3 | 13.00 | 21 | R |
| 58130‑ZW1‑W31ZA | 3 | 13.25 | 17 | R |
| 58130‑ZW1‑015AH | 3 | 13.50 | 15 | R |
| — | 3 | 13.625 | 13 | R |
| 58130‑ZW1‑W21ZA | 3 | 13.75 | 15 | R |
| 58130‑ZW1‑009AH | 3 | 14.00 | 9 | R |
| — | 3 | 14.00 | 10 | R |
| 58130‑ZW1‑011AH | 3 | 14.00 | 11 | R |
| 58130‑ZW1‑013AH | 3 | 14.00 | 13 | R |
| — | 3 | 14.00 | 15 | R |
| — | 3 | 14.00 | 17 | R |
| — | 3 | 14.00 | 19 | R |
| — | 3 | 14.00 | 21 | R |
| — | 3 | 14.00 | 23 | R |
| 4‑Blade Options | ||||
| 58134‑ZW1‑019AH | 4 | 12.50 | 19 | R |
| 58134‑ZW1‑015AH | 4 | 13.00 | 15 | R |
| 58134‑ZW1‑017AH | 4 | 13.00 | 17 | R |
| 58134‑ZW1‑019AH | 4 | 13.00 | 19 | R |
| 58134‑ZW1‑017AH | 4 | 13.40 | 15 | R |
| — | 4 | 13.80 | 10 | R |
| — | 4 | 13.80 | 11 | R |
| — | 4 | 13.80 | 13 | R |
Note: Hyphens (—) indicate a generic fitment pattern without a specific OEM number. Every entry shares the 15‑tooth spline and thru‑hub exhaust design.
Matching Propellers to Your Honda Engine
These aluminum props cover a wide swath of Honda outboards:
-
BFP 60HP: 2010 and newer
-
BF 75HP / BF 90HP: 1995 and newer
-
BF 100HP: 2016 and newer
-
BF 115HP: 1998–2010
-
BF 130HP: 1998–2004
Simply cross‑reference your engine’s HP rating and manufacturing year with the table above, then select the diameter and pitch combo that suits your boating style.
Tips for Selecting the Right Combination
-
Planing vs. Punch:
If you tow skiers or pull heavy tubes, lean toward a larger diameter, lower pitch (e.g., 14×10 or 14×11). You’ll plane quicker and maintain control under load. -
Top‑End Speed:
For cruisers or racers who chase mph, a smaller diameter, higher pitch (e.g., 12.75×21 or 13×21) unlocks extra thrust at higher RPMs—just watch your tachometer to avoid over‑revving. -
Four vs. Three Blades:
-
Three blades suit lighter boats and open‑water runs, trading a bit of bite for extra speed.
-
Four blades hook water tighter, giving you sharper turns, reduced ventilation, and a steadier ride in chop.
-
Installation & After‑Sales Service
Every prop ships with clear torque‑setting instructions and a disposable hub kit for snug engagement. We back our aluminum props with a 30‑day no‑hassle return policy and dedicated North America‑based support. If you ever need advice on selecting or installing your prop, our technicians are just a call or email away.
Ready to Upgrade?
Whether you’re building a fishing rig, walleye hunter, or bay runner, our aluminum propellers give you the confidence to push your Honda outboard to its potential. Browse the table above, pick the specs that match your rig, and get ready for a smoother, faster, more exhilarating ride!
All trademarks mentioned—Honda, Yamaha, Mercury, Suzuki, Volvo—belong to their respective owners. We are an independent manufacturer of aftermarket aluminum propellers designed to fit a variety of 60–130HP outboard motors.