Stainless Steel Propellers for 8–30HP Honda Outboard Boat Motor
Stainless steel propellers can transform your small- to mid‑range outboard engine into a sprightly, fuel‑efficient performer. Whether you’re buzzing across a glassy lake at dawn or hauling a heavy load through chop, the right combination of blade count, diameter and pitch makes all the difference. Below, you’ll find our in‑depth overview of stainless steel propellers designed for 8–20HP and 25–30HP Honda outboards. We’re not the official propeller supplier for Yamaha, Mercury, Suzuki, Volvo or Honda, but our aftermarket blades are engineered to fit many models from those brands with precision.
Why Stainless Steel?
-
Strength & Durability
Unlike aluminum, stainless steel holds its shape under heavy load and resists nicks, bends and corrosion. -
Efficiency
Sharper foil profiles slice through water cleanly, reducing cavitation and improving top‑end speed. -
Responsiveness
With a stiff hub, these props deliver crisp throttle response—ideal for waterskiing, tub‑pulling or quick acceleration.
Let’s dive into the specs for each engine class.
Propeller Options for 8–20HP Honda Outboards
Fits Honda BF 8 (2000‒newer), BF 9.9 (1988‒newer), BF 15 (1991‒newer) & BF 20 (2003‒newer)
2½″ Gearcase 8 Spline Tooth & Thru‑hub Exhaust
| OEM # | Part Number | Blades | Diameter (in) | Pitch | Rotation |
|---|---|---|---|---|---|
| 58133‑ZV4‑008AH | 3121‑093‑08 | 3 | 9 1/4 | 8 | R |
| 58133‑ZV4‑009AH | 3121‑093‑09 | 3 | 9 1/4 | 9 | R |
| 58133‑ZV4‑010AH | 3121‑093‑10 | 3 | 9 1/4 | 10 | R |
| 58133‑ZV4‑011AH | 3121‑093‑11 | 3 | 9 1/4 | 11 | R |
| 58133‑ZV4‑012AH | 3121‑093‑12 | 3 | 9 1/4 | 12 | R |
These three‑blade propellers balance acceleration and top‑end speed nicely. The 9 1/4″ diameter suits small gearcases, while pitches from 8″ to 12″ let you match your hull weight and throttle preference. If you run light loads, a finer pitch (8″–9″) gets you on plane quicker; heavier loads often benefit from 11″–12″.
Propeller Options for 25–30HP Honda Outboards
Fits Honda BF 25 (1994‒newer) & BF 30 (1995‒newer)
3″ Gearcase 10 Spline Tooth & Thru‑hub Exhaust
| OEM # | Part Number | Blades | Diameter (in) | Pitch | Rotation |
|---|---|---|---|---|---|
| 58133‑ZV7‑011AH | — | 3 | 9.9 | 11 | R |
| 58133‑ZV7‑012AH | — | 3 | 9.9 | 12 | R |
| 58133‑ZV7‑013AH | — | 3 | 9.9 | 13 | R |
| 58133‑ZV7‑014AH | — | 3 | 9.9 | 14 | R |
| 58133‑ZV7‑011AH | 5221‑100‑11 | 3 | 10 | 11 | R |
| 58133‑ZV7‑012AH | 5221‑100‑12 | 3 | 10 | 12 | R |
| 58133‑ZV7‑013AH | 5221‑100‑13 | 3 | 10 | 13 | R |
| — | 5221‑100‑14 | 3 | 10 | 14 | R |
| — | — | 3 | 10 | 15 | R |
| — | 5233‑100‑09 | 4 | 9.9 | 9 | R |
| — | 5233‑100‑10 | 4 | 9.9 | 10 | R |
For medium‑power outboards, a 3‑blade, 9.9″ or 10″ diameter covers most crew and cargo combinations. Notably, the four‑blade options (5233‑100‑09/10) deliver heavier‑boat thrust and better hole shots—key when you’re towing or navigating chop.
Matching Pitch & Performance
-
Finer Pitch (Lower Number)
-
Quicker planing
-
Better hole‑shot for watersports
-
Slightly lower top speed
-
-
Coarser Pitch (Higher Number)
-
Higher cruise and top‑end speed
-
Ideal for persistent headwinds or heavy loads
-
Slower acceleration
-
Pro Tip: If your GPS shows you’re revving above the recommended wide‑open RPM range, step up one pitch size. If you’re below, go down a size.
Installation & Maintenance
-
Hub Alignment: Always align the splines precisely—misalignment leads to premature wear.
-
Torque Specs: Tighten the prop nut to manufacturer’s recommendation (check your owner’s manual).
-
Routine Inspection: After every 50 hours, remove the propeller to clear debris and inspect the hub.
Why Choose Our Props?
-
First‑hand Engineering: Our team tests blade profiles in real‑world conditions—ranging from light skiffs to loaded pontoons—ensuring reliability you can feel.
-
Expert Support: Need help selecting pitch or blade count? We draw on decades of small‑engine tuning experience to guide your choice.
-
Value Proposition: You get near‑OEM fit and finish at a fraction of the cost, plus the corrosion resistance of premium 316 stainless.
Stainless steel propellers aren’t just hardware—they’re the final touch in crafting a memorable day on the water. We know the thrill of a perfect hole‑shot and the satisfaction of a record‑breaking run. That passion drives us to deliver blades that perform every time. Choose the OEM cross‑reference that fits your Honda 8–30HP outboard, pair it with the right pitch, and get ready for your best ride yet!