Aluminum Propellers for 35-60HP Tohatsu Outboard Boat Motor
Matching your Tohatsu 35–60HP outboard to the right propeller can transform your time on the water. Our precision-cast aluminum propellers slip straight onto the standard 13-spline, 3¼″ gearcase and deliver dependable thrust, crisp acceleration, and efficient cruising—no OEM badges required. While these props aren’t made by Yamaha, Mercury, Suzuki, Volvo, or Honda, they’ve been engineered to fit those engines perfectly.
What Sets Our Props Apart
-
Perfect Fit
Designed for 35–60HP Tohatsu models (including MFS and BFT variants), each prop slides on easily and bolts up without any special tools. -
Tailored Performance
Choose between three- or four-blade designs to dial in acceleration, planing speed, and fuel economy. Diameters range from 10" to 12¼", with pitches from 9" to 17"—so you can customize for light skiffs or heavier load-bearing hulls. -
Rugged Construction
Marine-grade aluminum alloy resists corrosion and cavitation. A slim hub profile reduces drag, while the robust blades stand up to impacts. -
Right-Hand Rotation
All models rotate clockwise (standard right-hand), matching the factory rotation on Tohatsu outboards.
Propeller Lineup
Below is our complete range of 13-spline, right-hand propellers for 35–60HP Tohatsu gearcases. Use the table to find the combination that suits your boat’s weight and desired performance.
| OEM Number | Blades | Diameter (in) | Pitch (in) | Rotation |
|---|---|---|---|---|
| – | 3 | 10 1/8 | 15 | R |
| – | 3 | 10 1/4 | 14 | R |
| – | 3 | 10 3/8 | 13 | R |
| – | 3 | 10 3/8 | 14 | R |
| – | 3 | 10 1/2 | 13 | R |
| – | 3 | 10 5/8 | 12 | R |
| – | 3 | 10 7/8 | 11 | R |
| 3T5B64532-0 | 3 | 11 | 15 | R |
| – | 3 | 11 | 17 | R |
| 3T5B64527-0 | 3 | 11.1 | 13 | R |
| 3T5B64529-0 | 3 | 11.1 | 14 | R |
| – | 3 | 11 1/8 | 13 | R |
| – | 3 | 11 1/8 | 16 | R |
| – | 3 | 11 1/4 | 13 | R |
| – | 3 | 11 1/4 | 14 | R |
| 353B64107-0 | 3 | 11 1/4 | 15 | R |
| – | 3 | 11 3/8 | 12 | R |
| 353B64106-0 | 3 | 11 3/8 | 14 | R |
| 3T5B64525-0 | 3 | 11.4 | 12 | R |
| 353B64103-0 | 3 | 11 1/2 | 11 | R |
| 353B64105-0 | 3 | 11 1/2 | 13 | R |
| 3T5B64523-0 | 3 | 11 5/8 | 11 | R |
| 353B64104-0 | 3 | 11 5/8 | 12 | R |
| 353B64102-0 | 3 | 11 3/4 | 10 | R |
| 353B64101-0 | 3 | 12 1/4 | 9 | R |
| – | 4 | 10.1 | 14 | R |
| – | 4 | 10.1 | 15 | R |
| – | 4 | 10.3 | 13 | R |
| – | 4 | 10 3/8 | 13 | R |
| – | 4 | 10.6 | 11 | R |
| – | 4 | 10 5/8 | 12 | R |
Engine Compatibility
-
35HP (35B): through 1984
-
40HP: 1984–present (MFS 40HP from 2015)
-
50HP: 1992–present (all except 50C; MFS 50HP from 2019)
-
60HP: MD40/MD50 & M40C 2-cyl / M40D/M50D 3-cyl / MFS 60 / BFT 60 (2019+)
-
70HP (M70A/M70B 2-cyl): all years
Understanding the right pitch-diameter combination will help you tune for quicker hole-shots or higher top speeds. Three-blade props tend to offer balanced performance, while four-blades excel at rapid planing and precise handling.
Installation & Maintenance Tips
-
Inspect Splines: Make sure the shaft is clean and free of corrosion before sliding the prop on.
-
Proper Torque: Always torque the prop nut to the manufacturer’s spec to prevent slippage.
-
Vibration Check: After mounting, run at low speed to confirm there’s no wobble or vibration.
-
Rinse & Dry: Flush with fresh water after saltwater trips and let everything dry.
-
Seasonal Care: Apply a thin layer of marine grease to the hub for storage.