Skip to content
Najlepsze ceny rekwizytów teraz! 🌊
🎉Kod: SUPERVIF – Zdobądź 20 USD zniżki
Cart
0 items

What Do the Numbers on a Boat Propeller Mean?

by VIF Propeller 15 Nov 2026

In a two-number size such as 13 1/4 × 17, the first number is diameter and the second is pitch, normally in inches. A longer stamped code may be a part number instead. Letters can identify rotation or a manufacturer's series, so keep them with the numbers when you write the marking down. Diameter and pitch notation.

Before ordering a replacement, take a clear photo of the whole marking. Getting the fraction and the final letter into the same picture can save a surprisingly long exchange about which prop you actually have.

Start with a recognizable size pair

With 13 1/4 × 17, read the two dimensions separately:

  • 13 1/4 inches, or 13.25 inches, is the diameter of the circle traced by the blade tips.
  • 17 inches is the pitch: the theoretical forward distance for one revolution, rather than a promise of actual travel through water.

Those are two measurements, not an engine-horsepower range. The multiplication sign separates the fields; you don't need to multiply them. Propeller dimensions in Mercury's owner's manual.

Illustrated size label: 13 1/4 is diameter and 17 is pitch; blade count, rotation and part number are separate fields.
Size-label example only. Marking layouts vary; this is not a recommendation for a particular engine.

You'll also see listings that add blade count. Don't turn “the first number is diameter” into a rule for every three-number string. Check the column headings or written description. SOLAS, for example, describes a listing format that includes diameter, pitch and then blade count. SOLAS sizing explanation.

For a quick comparison between pages, rewrite the information into named fields: diameter, pitch, blades and rotation. That way, a change in how the seller arranges the numbers won't look like a different specification.

A letter can change how you read the number

On a Yamaha prop marked 17M, the 17 means 17-inch pitch and the M identifies the propeller series. Yamaha gives this example in its propeller FAQ. There isn't a diameter hiding in that short code.

So if you've found 17M, keep looking for the remaining information or look up the complete mark. Entering 17 as diameter would send the search in the wrong direction before you've even compared products.

RH and LH commonly indicate right-hand and left-hand rotation. A series letter and a rotation label serve different purposes. Read them under the manufacturer's own headings rather than assuming every letter after a number means the same thing. The SOLAS application catalog separates rotation from dimensions and part numbers.

Look up a part number as a whole

A reference such as 6E5-45945-01-EL isn't a pair of dimensions separated by an “x.” Start by searching the full reference with the maker's name. Then read the dimensions and application details returned by a reliable catalog or supplier.

Resist the temptation to pull a convenient “17” or “19” out of a longer code and call it pitch. That interpretation needs the manufacturer's numbering system behind it. A different brand may arrange its references differently.

In one boat-owner discussion about replacing a prop, a part-number lookup helped the owner identify the dimensions and rotation. The useful move was finding the record for the whole code first.

For a replacement from another manufacturer, ask for a cross-reference to the complete original part number. Keep the old reference and the proposed replacement reference on the same note. Two different part numbers may have a documented relationship; a matching handful of digits doesn't establish one.

If the stamp is hard to read, widen the photo

Markings aren't always in the first place you look. Mercury's manual describes size information on the side or end of the propeller hub; Yamaha also notes that marking locations vary. Start with the visible hub or barrel and photograph each mark you can safely reach.

Before putting your hands near the propeller, switch the engine off and prevent accidental starting using the procedure in your engine manual. If removal is needed to expose a hidden mark, follow that model's instructions or have a technician do it. Mercury's propeller-replacement precautions.

Take one close-up that makes the characters readable and another wider shot that shows where the mark sits. Include the maker's logo, if present. A tight crop can accidentally remove the letter or neighboring mark needed to interpret the number.

Found something that still makes no sense? You're in good company. A new owner asking about prop size had visible numbers but couldn't identify a useful size from them. Replies raised the possibility of workshop markings. That wasn't a confirmed diagnosis, but it's a good reason to leave unfamiliar stamps unresolved rather than force them into a size format.

If a character is unclear, mark it as uncertain in your message to the supplier. Let the photo carry what you can see. Guessing a neat-looking part number can make the search harder.

After decoding the prop, check the engine

Here is a handy example from the VIF catalog: both the Yamaha-application aluminum prop and the Mercury-application aluminum prop are listed as 13 1/4 × 17, three-blade, right-hand products. Their listed reference numbers differ: 6E5-45945-01-EL and 48-77344A45 respectively.

Reading the size correctly gets you two dimensions. It doesn't establish that the two products can be exchanged on your engine. Confirm the exact engine or drive model and year, the applicable gearcase and shaft or spline requirements, the hub arrangement, rotation and mounting hardware. Mercury's hub-kit product guidance illustrates why the hub, thrust washers and prop nut need their own checks.

Also tell the supplier whether the old prop performed satisfactorily with your normal load, or whether you're trying to solve a problem. Identifying what was fitted and deciding what should be fitted are separate jobs. Changing pitch or blade design calls for an assessment beyond reading a stamp.

With the whole marking photographed and your engine details alongside it, you have a useful starting point for that conversation. Keep the confirmed replacement number with your boat records afterward. Next time, you can spend less time squinting at a faded stamp—and hopefully more of the afternoon enjoying the water. Enjoy your next trip!

Prev Post
Next Post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose Options

Recently Viewed

Edit Option
Back In Stock Notification

Choose Options

this is just a warning
Login
Shopping Cart
0 items